|
Display:
|
LCD with 0.25 inch characters
Trend Indicating Arrows
Low Battery & Fault indication
|
|
User Functions:
|
Auto Off after 20 minutes or continuous operation
Lowest Reading, Highest Reading, Average Reading
Switchable in Units of °F or °C
Display hundredths or thousandths resolution
|
|
Construction:
|
Stainless Steel temperature sensor;
Standard Sensor length 8" (20cm)
Standard diameter 1/4" (6.35mm)
Sensor mount acetyl plastic
Electronics and display in 3.5" x 1.2" anodized Aluminum enclosure
Molded Silicone seal.
Highly durable display window, graphics and membrane switches.
|
|
Weight:
|
4 ounces, 124 grams
|
|
Temperature:
|
Resolution 0.001 Degrees
Standard Calibrated Range:
-4 to 300F, -20 to 150C
Tolerance: ±0.07°F ±0.04°C
NIST Traceable Repeat of Test
|
|
Temperature Time Constant:
|
19 seconds in circulated water bath
(63.2% response to temperature change)
|
|
Electronics:
|
Microcontroller and precision 20-bit A/D converter, FLASH Memory
Recommended Ambient Temperature Range for Best Accuracy 32 to 112 °F, 0 to 44°C
|
|
Sensor:
|
200 Ohm, Wire-wound Platinum RTD
Immersion depth 4", 11cm
|
|
Battery:
|
20mm Coin Size 3V Lithium, Duracell Type CR2032
Over 50 hours Service Life at 70°F, 21°C
Battery Operating Range -4 to 130°F, -20 to 54°C
Note: Battery may not provide adequate power if ambient temperature is below -4°F, -20°C or above 130°F, 54°C
|