Name: Thermoprobe TL1-W Laboratory Intrinsically Safe Thermometer
Model: TL1-W
Brand: Thermoprobe
Application: General Testing
Category: Thermometer
Standard:
Feature:

ThermoProbe

TL1-W

TL1-W

  • Minimum reading
  • Maximum reading
  • Averaging
  • Easy °F to °C switching
  • Backlight
  • Sturdy frame
  • Display arrows indicate increasing or decreasing temperature

Display:

LCD with 0.25 inch characters
Trend Indicating Arrows
Low Battery & Fault indication
 

User Functions:

Auto-off after 20 minutes or continuous operation
Lowest Reading, Highest Reading, Average Reading
Switchable in Units of °F or °C
Display tenths or hundredths resolution
 

Construction:

Stainless steel temperature sensor; Standard Sensor length 8" (20cm)
Standard diameter 1/4" (6.35mm) with reduced diameter tip of 3/16" (4.76mm)
Sturdy Acetal frame surrounding aluminum enclosure
Electronics and display in 3.5" x 1.2" anodized Aluminum enclosure
Molded Silicone seal.
Highly durable display window, graphics and membrane switches.
 

Weight:

6.5 ounces, 180 grams

Temperature:

Resolution 0.01 Degrees
Calibrated Accuracy:
±0.1°F from 14 to 320°F
±0.06°C from -10 to 160°C
NIST Traceable Report of Test
 

Temperature Time Constant:

8 seconds in circulated water bath
(63.2% response to temperature change)

Electronics:

Ultra Low Power Microcontroller
FLASH Memory
20 bit A/D Converter
Recommended Ambient Temperature Range for Best Accuracy 32° to 112°F, 0° to 44°C
 

Sensor:

100 Ohm, Class A 1/3 DIN RTD
Immersion depth 4", 11cm

Battery:

2 AAA Duracell MX2400
Battery Life several hundred hours depending on backlight usage
Battery Operating Range -4 to 130°F, -20 to 54°C
Note: Battery may not provide adequate power if ambient temperature is below -4°F, -20°C or above 130°F, 54°C
 

The current number of visitors: 2767101